Skip to main content

The universal TPMS sensor for heavy commercial vehicles

A universal TPMS sensor offers many advantages over a permanently programmed OE sensor in the aftermarket in terms of storage, seasonal tire changes and a few other issues. In the TRUCK sector, the position of the sensor in the rim well and the free programmability bring two further advantages to the fore.
The TRUCK UNI sensor is freely reprogrammable

Programmable as often as required

The TRUCK UNI sensor is freely reprogrammable throughout its entire service life and can therefore be used on different wheels and vehicles.
The truck sensor is protected in the rim well

Protected position

Thanks to its protected position in the rim well, the sensor is much better protected against damage when fitting and removing the tire than a conventional OE sensor on the valve.
Thanks to wireless programming, complete wheels can be swapped between vehicles at will.

Wireless programmable

As the sensor can be programmed wirelessly, it is not necessary to remove the tire to program the sensor to the respective target vehicle when replacing the wheel.
The retaining strap in the three sizes 17.5“, 19.5” and 22.5”

Retaining strap in three sizes

The heavy-duty retaining strap has a maximum tensile strength of 5,000 daN (loop 1,000 daN) and is available for rims in the sizes 17.5“, 19.5” and 22.5”.
The retaining strap is fastened to the rim with Velcro

Clever Velcro fastener

The large Velcro fastener allows the retaining strap to be attached securely and quickly to the rim. The Velcro strap must only be tightened by hand.
The robust holder protects the sensor and holds it firmly in position on the rim

Non-slip holder

The sensor holder has a non-slip layer on the underside to prevent the sensor from slipping on the rim, thus ensuring safe operation.

The Truck TPMS Sensor product range

Truck UNI-Sensor EVO

Truck UNI-Sensor EVO

Art. VS-68U001
The TRUCK UNI sensor is freely programmable and transmits on a frequency of 433 MHz.
Truck Sensor Holder EVO

Truck Sensor Holder EVO

Art. VS-69V116-EVO
The Truck Sensor Holder EVO is made of the same material as the Truck UNI Sensor EVO.
Truck Sensor Retaining Strap EVO

Truck Sensor Retaining Strap EVO

Art. VS-69V038 | 039 | 040
The retaining strap is available for all commercial vehicle rims in the sizes 17.5“, 19.5” and 22.5”.
Truck-System SET EVO 17.5"

Truck-System SET EVO 17.5"

Art. VS-68U175-EVO
The Truck-System SET EVO 17.5" contains all the parts needed to equip a 17.5" wheel with the Truck UNI sensor.
Truck-System SET EVO 19.5"

Truck-System SET EVO 19.5"

Art. VS-68U195-EVO
The Truck-System SET EVO 19.5" contains all the parts needed to equip a 19.5" wheel with the Truck UNI sensor.
Truck-System SET EVO 22.5"

Truck-System SET EVO 22.5"

Art. VS-68U225-EVO
The Truck-System SET EVO 22.5" contains all the parts needed to equip a 22.5" wheel with the Truck UNI sensor.
We use cookies

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.