The universal passenger car TPMS from Cub

RTS Räder Technik Service GmbH also sells the universal passenger car TPMS from the Cub brand. The TPMS.cloud, offered exclusively by RTS, makes it possible to archive data digitally recorded with the Sensor AID 4.0 for all aspects of the complete wheel, as well as to connect and transfer data to your ERP or merchandise management system.

Sensor AID 4.0

The Sensor AID 4.0 is a TPMS programming and diagnostic device by Cub that can read and program Cub UniSensor2 models in the programming slot or wirelessly.

In addition, various data relating to the TPMS sensor, the rim and the tire can be digitally recorded and stored.

UniSensor2

The UniSensor2 is a freely programmable 433 MHz universal TPMS sensor that is available with three different clamp-in valves in the colors silver, grey and black or a snap-in rubber valve.

The clamp-in valves are salt spray tested.

BLE sensor

The Bluetooth Low Energy (BLE) sensor from Cub has been specially developed for Tesla models from model year 2021 onwards. It is supplied pre-programmed and can be used plug'n'play.

The silver and black valve options are available for the BLE sensor. A gray valve is available separately.

Further Cub products are available in the RTS Räder Technik Service GmbH webshop.

Go to the RTS webshop

The TPMS.cloud by RTS

The TPMS.cloud is a free solution from RTS Räder Technik Service GmbH for storing, processing and archiving digitally recorded data with the Cub Sensor AID 4.0. The data stored in the TPMS.cloud can be exported in a structured manner and then imported into your ERP system so that you can centrally assign all data to the respective customer.